# LG C4 & G4 OLED 144Hz Mode 'No Signal' or Flickering on PC: HDMI 2.1 FRL6 48Gbps & G-Sync Fix
> Stabilizing 4K 144Hz 10-Bit RGB with VESA DSC 1.2a & Game Optimizer on RTX 40/50 & Radeon GPUs

**Canonical URL**: https://www.sparecables.com/lg-c4-g4-144hz-pc-no-signal-fix/
**Published by**: Spare Cables Engineering Standards
**AI Citation Index**: Grounded in official USB-IF, VESA, and HDMI Forum specifications.

---

### Direct Answer (60-Word Capsule)
Enabling 144Hz PC Mode on an LG C4 or G4 OLED requires HDMI 2.1 Fixed Rate Link 6 (48 Gbps across 4 lanes at 12 Gbps/lane) combined with VESA DSC 1.2a compression. Cables that pass 4K 120Hz (FRL5 at 40 Gbps) frequently fail at 144Hz when FRL6 link training saturates uncertified copper. Replace your cord with an HDMI Forum QR-certified 48Gbps cable and enable 144Hz Mode inside LG Game Optimizer.

---

### Root Cause Analysis & Electrical Mechanism
While earlier LG C1/C2/C3 OLED TVs maxed out at 4K 120Hz (which fits uncompressed inside a 40 Gbps FRL5 link at 10 Gbps per lane), the LG C4 and G4 evo OLED panels introduce a dedicated 4K 144Hz PC refresh tier. Uncompressed 3840x2160 at 144Hz with 10-bit 4:4:4 RGB color demands ~53.6 Gbps of raw video payload—exceeding even the 42.6 Gbps net payload limit of HDMI 2.1. Consequently, the moment you toggle ON '144Hz Mode' inside the LG webOS Game Optimizer dashboard, the television's Alpha 9 Gen 7 / Alpha 11 AI processor forces an immediate HDMI 2.1 FRL6 renegotiation at the absolute maximum 48 Gbps rate (4 lanes x 12 Gbps) while simultaneously engaging VESA Display Stream Compression (DSC 1.2a) and updating its Extended Display Identification Data (EDID) block. Uncertified braided cables that barely survived 40 Gbps FRL5 at 120Hz suffer catastrophic eye-diagram closure and Forward Error Correction (FEC) buffer overflows at 12 Gbps/lane, causing the LG OLED to flash 'No Signal', 'Invalid Format', or black out repeatedly whenever NVIDIA G-Sync / AMD FreeSync Premium VRR modulates the vertical blanking interval.

### Technical Standards & Engineering Invariants
- 4K 144Hz 10-bit 4:4:4 RGB requires ~53.6 Gbps raw video bandwidth, making VESA DSC 1.2a compression over a full 48 Gbps FRL6 (4x12 Gbps) link mandatory on LG C4 and G4 OLED TVs.
- The 144Hz timing block is hidden from the TV's base EDID by default; Windows and NVIDIA Control Panel cannot see 144Hz until the '144Hz Mode' toggle is explicitly switched ON inside LG's Game Optimizer menu.
- Stepping from FRL5 (40 Gbps, 10 Gbps/lane) at 120Hz to FRL6 (48 Gbps, 12 Gbps/lane) at 144Hz raises the Nyquist signaling frequency to 6.0 GHz, where uncertified passive copper cables longer than 2m–3m fail eye-mask margin.
- NVIDIA GeForce RTX 20-series GPUs lack the HDMI 2.1 DSC 1.2a pipeline required for 4K 144Hz over HDMI; 4K 144Hz on LG C4/G4 requires an NVIDIA RTX 30/40/50-series, AMD Radeon RX 6000/7000/9000, or Intel Arc GPU.

### Proven Diagnostic & Step-by-Step Resolution
1. Press the Settings (gear) button on your LG Magic Remote to open the purple Game Optimizer bar, navigate to Game -> 144Hz Mode, and toggle it ON (this rewrites the HDMI port EDID to expose 3840x2160 @ 144Hz).
2. In LG webOS Settings -> General -> External Devices -> HDMI Settings -> HDMI Deep Color, verify the connected HDMI port is set to '4K' (Enhanced FRL mode).
3. Open the LG Home Hub, click the three-dot menu in the top right -> Edit Inputs, and change the HDMI port icon to 'PC' to lock in 4:4:4 Chroma and low-latency DSC.
4. Replace your HDMI cord with a 2-meter HDMI Forum QR-Certified Ultra High Speed 48Gbps cable (such as the Zeskit Maya) plugged directly from the GPU into the TV, bypassing any 4K120-only AV receiver or soundbar.
5. In NVIDIA Control Panel -> Change Resolution, scroll down to the 'PC' resolution list, select 3840 x 2160, choose 144Hz, and set Output Color Format to RGB, 10 bpc, Full Dynamic Range.

### Verified Hardware Solutions
- **Recommended Product**: [Zeskit Maya 2.1 8K60 4K144 48Gbps HDMI Forum Ultra High Speed Certified Cable (6.5ft / 2m)](https://www.amazon.com/dp/B08X6C4MY9?tag=sparecables-20)
- **Specification**: HDMI Forum QR Certified · 4K 144Hz FRL6 Verified
- **Why It Fixes the Issue**: Solid-core OFHC copper conductors with ultra-low inter-pair skew pass HDMI Forum Authorized Test Center (ATC) eye-mask compliance at full 48 Gbps FRL6 (4x12 Gbps), eliminating 'Invalid Format' and G-Sync dropouts when LG C4 and G4 144Hz Mode engages.
- **Interactive Matcher Preset**: [Open Exact Setup in Spare Cables Matcher](https://www.sparecables.com/#src=gpu_pc&dst=watch_tv&dist=2)

### Frequently Asked Questions
#### Q: Why does 4K 120Hz work flawlessly on my LG C4, but switching to 144Hz immediately says 'No Signal'?
At 4K 120Hz 10-bit, the LG OLED negotiates an FRL5 link at 40 Gbps (10 Gbps per lane) without DSC. Enabling 144Hz forces the link up to FRL6 (48 Gbps at 12 Gbps per lane) with DSC 1.2a compressed packet headers. Any impedance mismatch or crosstalk in an uncertified cable causes DSC slice header corruption, which immediately drops the entire screen to black.

#### Q: Can I use NVIDIA DSR / DLDSR when 144Hz Mode is enabled on the LG C4 or G4?
Because 4K 144Hz over HDMI 2.1 requires VESA Display Stream Compression (DSC), earlier NVIDIA display engines disabled DSR/DLDSR whenever two internal pixel heads were merged for DSC. On RTX 40-series and RTX 50-series GPUs, if you need legacy DSR scaling without DSC, toggle 144Hz Mode OFF in Game Optimizer to run uncompressed 4K 120Hz.

#### Q: What if my PC is 5 to 10 meters away from my LG C4 or G4 OLED TV?
Passive copper HDMI 2.1 cables cannot sustain 48 Gbps FRL6 + DSC 1.2a beyond 3 meters (10 feet). For runs between 5 meters and 15 meters, you must use an HDMI Forum Certified Active Optical Cable (AOC) fiber lead with SOURCE plugged into the GPU and DISPLAY plugged into the LG TV.